Motional Electromotive Force MCQ Quiz in मल्याळम - Objective Question with Answer for Motional Electromotive Force - സൗജന്യ PDF ഡൗൺലോഡ് ചെയ്യുക

Given:

Square side length

To find the magnetic field ( B ) at the center O of the square.

Concept:

• The magnetic field at the center of a square due to one side carrying current is given by:
• , where R is the perpendicular distance from the center of the square to the side, and , are the angles subtended by the side at the center.
• For a square, each side contributes equally, and the total field is four times the field due to one side.

Calculation:

The distance from the center of the square to the midpoint of a side:

For each side,

Magnetic field due to one side:

Substituting

Total magnetic field at the center (from 4 sides):

∴ The magnetic field at the center is .

Explanation:

The problem involves a metal rod moving through a magnetic field and inducing an electromotive force (EMF). The rod's length, velocity, magnetic field strength, and the angle at which it moves through the magnetic field are given. We need to find the magnitude of the induced EMF.

First, let's summarize the given data:

• Length of the rod (l): 1.5 meters
• Velocity of the rod (v): 10 meters per second
• Magnetic field strength (B): 2 Tesla
• Angle between the rod's motion and the magnetic field (θ): 60 degrees

To find the magnitude of the induced EMF, we can use the formula for the motional EMF induced in a conductor moving through a magnetic field:

EMF = Blv sin(θ)

Where:

• EMF is the induced electromotive force
• B is the magnetic field strength
• l is the length of the conductor
• v is the velocity of the conductor
• θ is the angle between the direction of motion and the magnetic field

Let's plug in the given values into the formula:

EMF = 2 T x 1.5 m x 10 m/s x sin(60 degrees)

We know that sin(60 degrees) = √3/2.

Therefore:

EMF = 2 x 1.5 x 10 x (√3/2)

EMF = 30 x (√3/2)

EMF = 15√3 volts

Let's calculate the numerical value of 15√3:

√3 ≈ 1.732

EMF ≈ 15 x 1.732

EMF ≈ 25.98 volts

Rounding to two decimal places, we get approximately 26 volts.

Therefore, the magnitude of the induced EMF is approximately 26 volts, which matches option 4.

velocity

Side length

Magnetic field

Refer image,

Here, three cases will exist

1) When block is outside the magnetic field

Initially emf

2) When it starts entering the magnetic field

Above emf will have a negative sign as flux will oppose in the opposite direction of the magnetic field.

3) When block is in the magnetic field.

After it has covered (length)

is remaining. .................[Magnetic field length = 2 cm]

From the above 3 cases,

Initially, emf will be zero then emf will be induced with

emf of and then covering

it will induce emf

Option c is correct.

Concept:

Motional emf is the emf induced in a conducting rod when it moves in a region of the magnetic field.

Mathematically, 

Motional EMF ⇒ ϵ = BVL

where, B = magnetic induction, V = velocity and L = length

Calculation:

Motional EMF

ϵ = BVL

= (v×B).L

ϵ = BVL = IR

I  =  

F = ILB

F_B = I (L×B)

F = F_B

ILB = F

F = LB

∴ F =  B2L2 v/R

The correct answer is option (3).

Calculation: 

The Earth's magnetic field is not fully perpendicular to the plane of the rotating fan. The vertical component of the magnetic field that is perpendicular to the plane of rotation is:

⇒ 

⇒ 

⇒ 

⇒ 32π × 10^-5 V

∴  The value of N is 32.

CONCEPT:

• Motional emf: The emf induced due to motion relative to a magnetic field is called the motional emf. 

​

• Consider a straight conductor PQ moving perpendicular to a uniform magnetic field B.
  • Assume the motion of the rod to be uniform with a constant velocity of (v m/s).
  • The rectangle PQRS forms a closed circuit enclosing a changing area due to the motion of the rod PQ.
• The magnetic flux ϕ enclosed by the loop PQRS can be given as:

⇒ ϕ = B × area = B × (l.x)

• Since the conductor is moving, there is a change in the rate of area moving. This causes a rate of change of flux which induces an emf.
• This induced emf is given by:

Where   is the speed of the conductor PQ​

EXPLANATION:

• According to Lenz law, the polarity of induced EMF is such that it opposes the change in magnetic flux responsible for its production.
• Magnetic flux depends on the area of the circular conductor. The magnetic flux (ϕ) enclosed by the circular loop can be given as ϕ = B × area
• If the coil is cut somewhere and then moved in and out of the magnetic field, EMF will be generated. 
• The basic cause of induced emf is the change in magnetic flux.
• When a conductor is moved in and out of the magnetic field, magnetic flux across it changes. this causes the generation of EMF in the direction such that it opposes the change. Hence option 4) is correct.

CONCEPT:

• Motional emf: The emf induced due to motion relative to a magnetic field is called the motional emf. 

​

• Consider a straight conductor PQ moving perpendicular to a uniform magnetic field B.
  • Assume the motion of the rod to be uniform with a constant velocity of (v m/s).
  • The rectangle PQRS forms a closed circuit enclosing a changing area due to the motion of the rod PQ.
• The magnetic flux ϕ enclosed by the loop PQRS can be given as:

⇒ ϕ = B × area = B × (l.x)

• Since the conductor is moving, there is a change in the rate of area moving. This causes a rate of change of flux which induces an emf.
• This induced emf is given by:

Where   is the speed of the conductor PQ​

CALCULATION:

Given: number of spokes, n = 20 length of spokes, l = radius (r) = 1m, magnetic field (B) = 0.4 gauss = 0.4 × 10^-4 tesla, and frequency (f) = 180 rpm = 3 rps

• The relation linear velocity and angular velocity is given by,

⇒ v = rω

Where ω is the angular velocity

Linear velocity of spoke at the axle = 0, and linear velocity at the rim end = rω .

• So the average liner velocity 

• Angular velocity (ω) of the spoke is given as

⇒ ω = 2πf = 2π × 3 = 6π 

• The emf between the axle and rim of the wheel.

⇒ ε = Blv = 0.4 × 10^-4 × 1 × 0.5 × 6π = 3.77× 10^-4 V

• Hence option 4) is correct.