Oscillators MCQ Quiz in தமிழ் - Objective Question with Answer for Oscillators - இலவச PDF ஐப் பதிவிறக்கவும்
Last updated on Mar 9, 2025
பெறு Oscillators பதில்கள் மற்றும் விரிவான தீர்வுகளுடன் கூடிய பல தேர்வு கேள்விகள் (MCQ வினாடிவினா). இவற்றை இலவசமாகப் பதிவிறக்கவும் Oscillators MCQ வினாடி வினா Pdf மற்றும் வங்கி, SSC, ரயில்வே, UPSC, மாநில PSC போன்ற உங்களின் வரவிருக்கும் தேர்வுகளுக்குத் தயாராகுங்கள்.
Latest Oscillators MCQ Objective Questions
Top Oscillators MCQ Objective Questions
Oscillators Question 1:
A blocking oscillator is a _________
Answer (Detailed Solution Below)
Option 3 : Saw-tooth wave oscillator
Oscillators Question 1 Detailed Solution
- A blocking oscillator used to produce narrow pulses or trigger pulses it is also called Saw-tooth wave oscillator
- When we take feedback from the output signal, it blocks the feedback, after a cycle, for certain predetermined time
Oscillators Question 2:
Relaxation oscillators can be used to produce output waveforms of
Answer (Detailed Solution Below)
Option 2 : saw-tooth, triangle and square
Oscillators Question 2 Detailed Solution
Relaxation oscillators
- A relaxation oscillator is a non-linear oscillator that can generate a non-sinusoidal periodic waveform at its output.
- The non-sinusoidal periodic waveform can be saw-tooth, triangular, or square.
- A relaxation oscillator operates in such a way that it generates oscillations by charging the capacitor and quickly discharging it after attaining a pre-determined threshold voltage.
- UJT and OP-AMP are generally used as relaxation oscillators
.Circuit diagram of relaxation oscillator:
The waveform of the relaxation oscillator is:
Oscillators Question 3:
In a multivibrator
Answer (Detailed Solution Below)
Option 4 : All of the above
Oscillators Question 3 Detailed Solution
Multivibrator:
- In each state, one transistor is switched on and the other is switched off
- A multivibrator circuit oscillates between a “HIGH” state and a “LOW” state producing a continuous output
Oscillators Question 4:
A colpitts oscillator use
Answer (Detailed Solution Below)
Option 2 : A tapped capacitor
Oscillators Question 4 Detailed Solution
- Colpitts oscillator consists of two inductors and one capacitor
- Capacitor with a centre tap is used in feedback system of Colpitts oscillator
- It is used for generation of sinusoidal output signals with very high frequencies
Oscillators Question 5:
Feedback used in a RC oscillator is of _______
Answer (Detailed Solution Below)
Option 2 : Positive type
Oscillators Question 5 Detailed Solution
- Positive Feedback is preferred in oscillators as it provides positive gain to the system.
- It will improve the overall system gain.
- For oscillators the gain should be at maximum to have sustained oscillations.
Oscillators Question 6:
For a system to work, as oscillator, the total phase shift of the loop gain must be equal to:-
Answer (Detailed Solution Below)
Option 1 : 360°
Oscillators Question 6 Detailed Solution
For an oscillator to work the feedback network must introduce an additional ± 180° so that the total phase is 0° or ±360°.